| |
|
Commercial/Industrial operators are designed
to perform based upon specific operational features of each door.
Dependent upon the myriad of design styles and operational features
of a door, a specific motor is chosen. The models vary by functionality,
(drawbar, jackshaft), as well as by the horse power. Each model must
be selected after having considered the weight and cycles per day
of the door.
 |
|
 |
|
- Heavy duty Gear Reduced Hoist Motor
- Chain drive
- Reversing contactor circuit
- Emergency disconnect for manual operation
|
|
 |
|
|
|
- Heavy industrial-duty trolley operator
- Chain drive
- Reversing contactor circuit
- Emergency disconnect for manual operation
|
|
 |
|
|
|
- Light duty 1/2 HP Motor
- 115 Volt single phase
- Chain drive
- Security Light
- Posi lock feature securely locks door in down position
- Rolling code receiver
|
|
 |
|
|
|
- Medium duty 1/2 HP Motor
- Single phase
- Chain drive
- Auxiliary reversing system
- Emergency disconnect for manual operation
- 3 Button station standard
- Nema 1 electrical box
|
|
 |
|
|
|
- Industrial Duty
- Available 1/3, 1/2, 3/4, or 1 HP
- Single phase
- Chain drive
- Pre wired to accept sensing edge, photo electric control, radios, and most access equipment
- Oiled bearings
- Brakes standard on 3/4 and 1 HP
- 3 Button stations
|
|
 |
|
|
|
- Industrial duty
- 115V, 208/230V and 460V Solid State NEC Class 2 Circuit Only
- Available in 1/3, 1/2, 3/4, or 1 HP motors
- Single phase or three phase
- Emergency manual release disconnect
- C2, B2, D1, and E2 wiring standard
- Industrial ball bearings
- 3 Button wall station
- Maximum run time prevents excessive cycle time due to malfunction
|
|
 |
|
|
|
- Medium duty (Car wash opener)
- 1/2 HP, 115 volt single phase motor
- Floor level disconnect
- Heavy duty brake
- 3 Button station
- Nema 1 type electrical box
|
|
 |
|
|
|
- Standard duty
- 115V, 208/230V and 460V Solid State NEC Class 2 Circuit Only
- Available 1/2, 1/2, 3/4, or 1 HP
- Single or three phase
- Emergency manual release
- Wiring type C2, B2, D1, E2 all standard
- Positive locking mechanical brake system
- Industrial ball bearings
- Nema 1 type cover
|
|
 |
|
|
|
- Medium duty
- 1/2 HP, 115 Volt single phase
- Emergency manual release disconnect
- Heavy duty solenoid brake
- C-2 wiring
- Oil-filled bearings
- 3 Button wall station
|
|
|
 |
